FULX Control and Protection Panels

FULX Control and Protection Panels

FULX Control and Protection Panels

The FULX panel is a flexible and user-friendly switchgear solution. It offers easy assembly, customization, and modification even after installation. Its lightweight design and modular construction make it ideal for various applications in industrial and commercial settings.

Advantages:

  • Flexibility in Panel Combination: Ability to combine fixed and swing panels in specific conditions.
  • Easy Access to Cables: Multi-piece gland plate allows for easy access to incoming cables by removing a single piece.
  • Efficient Wiring: Wiring is done on the equipment installation tray and the swing panel outside the cell, increasing work speed and reducing errors.
  • Aesthetically Pleasing Design: The panel has a visually appealing and stylish design.
  • Lightweight Frame: The lightweight frame makes it easier to move the empty panel compared to other similar panels.
  • Bolt and Nut Connections: Most of the panel's connections are made with bolts and nuts, making storage, transportation, and mass production easier.
  • Quick and Easy Assembly: The panel can be assembled quickly and easily.
  • High Strength: The profile design provides high strength.
  • High Maneuverability in Assembly: High flexibility in the assembly method (using equipment trays, supports, or both simultaneously, in both swing and fixed models).
  • Modular Design: The ability to use combined cells and multi-cell panels even after assembly, installation, or energizing.
  • Flexibility in Modifications: The ability to change, repair, or replace any part of the panel even after installation and energizing.
  • Easy Transportation: All connections between cells are made with bolts and nuts, allowing them to be easily disassembled before transportation and reassembled at the destination. This reduces the risk of damage to both the panel and personnel.
  • Lightweight and Strong Columns: The columns are designed to be lightweight and strong.
  • Wide Swing Angle: The swing angle is more than 120 degrees and is available in two sizes, 80 and 100 cm wide.
  • Customizable Sizes: The panel can be manufactured in various widths and depths (100x80, 80x80, and 80x60 cm) in a short time
  • Easy Access from Below: The bottom of the panel (plinth) is accessible from all four sides, allowing for easy installation in control rooms without cable channels.

General Specification

Rated voltage40.5KV
Rated Frequency50/60Hz
Rated voltage40.5KV
Rated Frequency50/60Hz
Rated Frequency50/60Hz
Rated voltage40.5KV
Rated Frequency50/60Hz
Rated voltage40.5KV
Rated voltage40.5KV
Rated voltage40.5KV
Rated voltage40.5KV
FULX Control and Protection Panels

Main Parts:

  • Main Body: A strong frame with sides and a top.
  • Covers: A top and back part that can be moved, and a front door that opens wide
  • Shelves for Equipment: Special parts to hold the electrical equipment.

Other Parts:

  • Side Covers: To protect the inside.
  • Holes for Wires: For cables to go in and out.
  • Parts to Hold Things: For attaching other parts.